[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.26-bpo.1-686 (Debian 2.6.26-5~bpo40+1) (nobse@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Sat Sep 20 16:54:19 UTC 2008 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003bee0000 (usable) [ 0.000000] BIOS-e820: 000000003bee0000 - 000000003bee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003bee3000 - 000000003bef0000 (ACPI data) [ 0.000000] BIOS-e820: 000000003bef0000 - 000000003bf00000 (reserved) [ 0.000000] BIOS-e820: 000000003c000000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] 62MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at [c00f3a00] 000f3a00 [ 0.000000] Entering add_active_range(0, 0, 245472) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 245472 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 245472 [ 0.000000] On node 0 totalpages: 245472 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 126 pages used for memmap [ 0.000000] HighMem zone: 15970 pages, LIFO batch:3 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.2 present. [ 0.000000] ACPI: RSDP 000F7A10, 0014 (r0 Nvidia) [ 0.000000] ACPI: RSDT 3BEE3040, 0038 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 3BEE30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI Warning (tbfadt-0442): Optional field "Pm2ControlBlock" has zero address or length: 0000000000000000/1 [20080321] [ 0.000000] ACPI: DSDT 3BEE3180, 6378 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E) [ 0.000000] ACPI: FACS 3BEE0000, 0040 [ 0.000000] ACPI: SSDT 3BEE9600, 0248 (r1 PTLTD POWERNOW 1 LTP 1) [ 0.000000] ACPI: _HPT 3BEE98C0, 0038 (r1 Nvidia AWRDACPI 42302E31 AWRD 98) [ 0.000000] ACPI: MCFG 3BEE9940, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: APIC 3BEE9540, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000) [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 2 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243554 [ 0.000000] Kernel command line: root=/dev/mapper/Ubuntu-root ro no_timer_check noacpi [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2310.658 MHz processor. [ 0.004000] spurious 8259A interrupt: IRQ7. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Memory: 964228k/981888k available (1770k kernel code, 17100k reserved, 751k data, 244k init, 64384k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB) [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB) [ 0.004000] .data : 0xc02ba8a3 - 0xc0376620 ( 751 kB) [ 0.004000] .text : 0xc0100000 - 0xc02ba8a3 (1770 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.084093] Calibrating delay using timer specific routine.. 4626.43 BogoMIPS (lpj=9252874) [ 0.084192] Security Framework initialized [ 0.084231] SELinux: Disabled at boot. [ 0.084267] Capability LSM initialized [ 0.084313] Mount-cache hash table entries: 512 [ 0.084470] Initializing cgroup subsys ns [ 0.084507] Initializing cgroup subsys cpuacct [ 0.084544] Initializing cgroup subsys devices [ 0.084595] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.084635] CPU: L2 Cache: 512K (64 bytes/line) [ 0.084671] CPU 0(2) -> Core 0 [ 0.084706] Intel machine check architecture supported. [ 0.084744] Intel machine check reporting enabled on CPU#0. [ 0.084788] Checking 'hlt' instruction... OK. [ 0.101023] ACPI: Core revision 20080321 [ 0.110336] ENABLING IO-APIC IRQs [ 0.110609] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.110655] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 01 [ 0.112007] APIC calibration not consistent with PM Timer: 349ms instead of 100ms [ 0.112007] APIC delta adjusted to PM-Timer: 359611 (1255744) [ 0.112007] Booting processor 1/1 ip 6000 [ 0.144009] Initializing CPU#1 [ 0.144009] Calibrating delay using timer specific routine.. 1323.39 BogoMIPS (lpj=2646793) [ 0.144009] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.144009] CPU: L2 Cache: 512K (64 bytes/line) [ 0.144009] CPU 1(2) -> Core 1 [ 0.144009] Intel machine check architecture supported. [ 0.144009] Intel machine check reporting enabled on CPU#1. [ 0.224230] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 01 [ 0.224580] Brought up 2 CPUs [ 0.224615] Total of 2 processors activated (5949.83 BogoMIPS). [ 0.224685] CPU0 attaching sched-domain: [ 0.224687] domain 0: span 0-1 [ 0.224689] groups: 0 1 [ 0.224693] CPU1 attaching sched-domain: [ 0.224694] domain 0: span 0-1 [ 0.224696] groups: 1 0 [ 0.228014] net_namespace: 660 bytes [ 0.228014] Booting paravirtualized kernel on bare hardware [ 0.232014] NET: Registered protocol family 16 [ 0.232014] ACPI: bus type pci registered [ 0.232014] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.232014] PCI: MCFG area at f0000000 reserved in E820 [ 0.232014] PCI: Using MMCONFIG for extended config space [ 0.232014] PCI: Using configuration type 1 for base access [ 0.232014] Setting up standard PCI resources [ 0.248723] ACPI: EC: Look up EC in DSDT [ 0.272343] ACPI: Interpreter enabled [ 0.272380] ACPI: (supports S0 S3 S4 S5) [ 0.272504] ACPI: Using IOAPIC for interrupt routing [ 0.308019] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.308019] PCI: Transparent bridge - 0000:00:04.0 [ 0.308161] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.308415] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.528031] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 *10 11 14 15) [ 0.528403] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.532813] ACPI: PCI Interrupt Link [LNK3] (IRQs *5 7 9 10 11 14 15) [ 0.533180] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.536354] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.536772] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.540061] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.540479] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.540897] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 *11 14 15) [ 0.544123] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.544542] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15) [ 0.544909] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.548174] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15) [ 0.548541] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.548960] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15) [ 0.552204] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15) [ 0.552577] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.553000] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15) [ 0.556224] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.556679] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0 [ 0.556978] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 0.560164] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 [ 0.560461] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 0.560781] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 0.561100] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. [ 0.564275] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. [ 0.564594] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 0.564914] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0 [ 0.568134] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 [ 0.568493] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. [ 0.568873] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 0.572112] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 0.572471] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 0.572831] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 [ 0.576048] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 0.576429] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.576809] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.584177] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. [ 0.588021] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.588021] pnp: PnP ACPI init [ 0.588021] ACPI: bus type pnp registered [ 0.608021] pnp: PnP ACPI: found 13 devices [ 0.608021] ACPI: ACPI bus type pnp unregistered [ 0.608021] PnPBIOS: Disabled by ACPI PNP [ 0.608021] PCI: Using ACPI for IRQ routing [ 0.612081] ACPI: RTC can wake from S4 [ 0.616034] system 00:01: ioport range 0x1000-0x107f has been reserved [ 0.616074] system 00:01: ioport range 0x1080-0x10ff has been reserved [ 0.616114] system 00:01: ioport range 0x1400-0x147f has been reserved [ 0.616153] system 00:01: ioport range 0x1480-0x14ff has been reserved [ 0.616193] system 00:01: ioport range 0x1800-0x187f has been reserved [ 0.616232] system 00:01: ioport range 0x1880-0x18ff has been reserved [ 0.616273] system 00:01: iomem range 0xfefe0000-0xfefe01ff could not be reserved [ 0.616323] system 00:01: iomem range 0xfefe1000-0xfefe10ff could not be reserved [ 0.616373] system 00:01: iomem range 0x3c000000-0x3fffffff could not be reserved [ 0.616426] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.616465] system 00:02: ioport range 0x800-0x87f has been reserved [ 0.616503] system 00:02: ioport range 0x290-0x297 has been reserved [ 0.616549] system 00:0b: iomem range 0xf0000000-0xf3ffffff could not be reserved [ 0.616602] system 00:0c: iomem range 0xf0000-0xfffff could not be reserved [ 0.620021] system 00:0c: iomem range 0xfeff0000-0xfeff00ff could not be reserved [ 0.620071] system 00:0c: iomem range 0x3bee0000-0x3befffff could not be reserved [ 0.620120] system 00:0c: iomem range 0xffff0000-0xffffffff could not be reserved [ 0.620170] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.620209] system 00:0c: iomem range 0x100000-0x3bedffff could not be reserved [ 0.620258] system 00:0c: iomem range 0x3bf00000-0x3fefffff could not be reserved [ 0.620307] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.620357] system 00:0c: iomem range 0xfee00000-0xfeefffff could not be reserved [ 0.620406] system 00:0c: iomem range 0xfefff000-0xfeffffff could not be reserved [ 0.620456] system 00:0c: iomem range 0xfff80000-0xfff80fff could not be reserved [ 0.620507] system 00:0c: iomem range 0xfff90000-0xfffbffff could not be reserved [ 0.623403] system 00:0c: iomem range 0xfffed000-0xfffeffff could not be reserved [ 0.728169] PM-Timer running at invalid rate: 349% of normal - aborting. [ 0.728227] PCI: Bridge: 0000:00:04.0 [ 0.728262] IO window: b000-cfff [ 0.728298] MEM window: 0xfd800000-0xfd8fffff [ 0.728335] PREFETCH window: 0x00000000fdf00000-0x00000000fdffffff [ 0.728375] PCI: Bridge: 0000:00:09.0 [ 0.728409] IO window: a000-afff [ 0.728444] MEM window: 0xfde00000-0xfdefffff [ 0.728481] PREFETCH window: 0x00000000fdd00000-0x00000000fddfffff [ 0.728520] PCI: Bridge: 0000:00:0b.0 [ 0.728554] IO window: 9000-9fff [ 0.728589] MEM window: 0xfdc00000-0xfdcfffff [ 0.728626] PREFETCH window: 0x00000000fdb00000-0x00000000fdbfffff [ 0.728665] PCI: Bridge: 0000:00:0c.0 [ 0.731553] IO window: 8000-8fff [ 0.731588] MEM window: 0xfda00000-0xfdafffff [ 0.731624] PREFETCH window: 0x00000000fd900000-0x00000000fd9fffff [ 0.731670] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 0.731678] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 0.731684] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 0.731690] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 0.731720] NET: Registered protocol family 2 [ 0.743604] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.743904] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.747566] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.747991] TCP: Hash tables configured (established 131072 bind 65536) [ 0.748031] TCP reno registered [ 0.751627] NET: Registered protocol family 1 [ 0.751763] checking if image is initramfs...<4>Clocksource tsc unstable (delta = -357427705 ns) [ 1.323773] it is [ 1.967968] Freeing initrd memory: 5277k freed [ 1.972169] audit: initializing netlink socket (disabled) [ 1.972222] type=2000 audit(1223822894.964:1): initialized [ 1.972222] highmem bounce pool size: 64 pages [ 1.972222] Total HugeTLB memory allocated, 0 [ 1.972222] VFS: Disk quotas dquot_6.5.1 [ 1.972222] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.972222] msgmni has been set to 1768 [ 1.972882] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.972933] io scheduler noop registered [ 1.972968] io scheduler anticipatory registered [ 1.973005] io scheduler deadline registered [ 1.973054] io scheduler cfq registered (default) [ 1.973118] pci 0000:00:00.0: Enabling HT MSI Mapping [ 1.988414] pci 0000:00:04.0: Enabling HT MSI Mapping [ 1.988464] pci 0000:00:05.0: Enabling HT MSI Mapping [ 1.988524] pci 0000:00:08.0: Enabling HT MSI Mapping [ 1.988572] pci 0000:00:09.0: Enabling HT MSI Mapping [ 1.988622] pci 0000:00:0b.0: Enabling HT MSI Mapping [ 1.988671] pci 0000:00:0c.0: Enabling HT MSI Mapping [ 1.988720] pci 0000:00:0d.0: Boot video device [ 1.989364] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 1.989384] Allocate Port Service[0000:00:09.0:pcie00] [ 1.989982] Allocate Port Service[0000:00:09.0:pcie03] [ 1.990602] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 1.990621] Allocate Port Service[0000:00:0b.0:pcie00] [ 1.992378] Allocate Port Service[0000:00:0b.0:pcie03] [ 1.992378] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 1.992378] Allocate Port Service[0000:00:0c.0:pcie00] [ 1.992378] Allocate Port Service[0000:00:0c.0:pcie03] [ 1.992378] isapnp: Scanning for PnP cards... [ 2.348378] isapnp: No Plug & Play device found [ 2.356378] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 2.356378] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.357021] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.364378] brd: module loaded [ 2.364378] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 2.364378] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 2.364378] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.364391] mice: PS/2 mouse device common for all mice [ 2.364391] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 2.364391] rtc0: alarms up to one year, y3k [ 2.364391] cpuidle: using governor ladder [ 2.364391] cpuidle: using governor menu [ 2.364391] No iBFT detected. [ 2.364627] TCP cubic registered [ 2.364663] NET: Registered protocol family 17 [ 2.364703] Using IPI No-Shortcut mode [ 2.366527] registered taskstats version 1 [ 2.368434] rtc_cmos 00:04: setting system clock to 2008-10-12 14:48:14 UTC (1223822894) [ 2.368434] Freeing unused kernel memory: 244k freed [ 2.437129] input: AT Translated Set 2 keyboard as /class/input/input0 [ 2.704296] ACPI: PNP0C0B:00 is registered as cooling_device0 [ 2.704296] ACPI: Fan [FAN] (on) [ 2.716296] ACPI: ACPI0007:00 is registered as cooling_device1 [ 2.716938] ACPI: ACPI0007:01 is registered as cooling_device2 [ 2.725020] ACPI: LNXTHERM:01 is registered as thermal_zone0 [ 2.725020] ACPI: Thermal Zone [THRM] (40 C) [ 3.225020] usbcore: registered new interface driver usbfs [ 3.225046] usbcore: registered new interface driver hub [ 3.225723] usbcore: registered new device driver usb [ 3.237020] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.237020] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 [ 3.237020] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23 [ 3.237106] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 3.237109] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 3.237809] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 3.237874] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000 [ 3.297020] usb usb1: configuration #1 chosen from 1 choice [ 3.297020] hub 1-0:1.0: USB hub found [ 3.297020] hub 1-0:1.0: 8 ports detected [ 3.401128] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.401172] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.401221] usb usb1: Product: OHCI Host Controller [ 3.401258] usb usb1: Manufacturer: Linux 2.6.26-bpo.1-686 ohci_hcd [ 3.401296] usb usb1: SerialNumber: 0000:00:02.0 [ 3.405020] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 3.405020] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 22 [ 3.405020] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 3.405020] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 3.405020] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 [ 3.405020] ehci_hcd 0000:00:02.1: debug port 1 [ 3.405020] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 3.405020] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000 [ 3.417030] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 3.417147] usb usb2: configuration #1 chosen from 1 choice [ 3.417210] hub 2-0:1.0: USB hub found [ 3.417250] hub 2-0:1.0: 8 ports detected [ 3.521125] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.521169] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.521218] usb usb2: Product: EHCI Host Controller [ 3.521255] usb usb2: Manufacturer: Linux 2.6.26-bpo.1-686 ehci_hcd [ 3.521292] usb usb2: SerialNumber: 0000:00:02.1 [ 3.533268] No dock devices found. [ 3.565320] SCSI subsystem initialized [ 3.597723] Uniform Multi-Platform E-IDE driver [ 3.597723] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 3.633723] libata version 3.00 loaded. [ 3.641723] IT8212: IDE controller (0x1283:0x8212 rev 0x13) at PCI slot 0000:01:05.0 [ 3.643907] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 [ 3.647899] ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16 [ 3.647998] it821x: controller in pass through mode. [ 3.648035] IT8212: 100% native mode on irq 16 [ 3.648076] ide0: BM-DMA at 0xbc00-0xbc07 [ 3.649723] ide1: BM-DMA at 0xbc08-0xbc0f [ 3.649762] Probing IDE interface ide0... [ 3.962580] hda: WDC WD600AB-00BVA0, ATA DISK drive [ 4.002593] usb 1-2: new low speed USB device using ohci_hcd and address 2 [ 4.230580] usb 1-2: configuration #1 chosen from 1 choice [ 4.242580] usb 1-2: New USB device found, idVendor=046d, idProduct=c00e [ 4.242580] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.242580] usb 1-2: Product: USB-PS/2 Optical Mouse [ 4.242580] usb 1-2: Manufacturer: Logitech [ 4.242580] hdb: MAXTOR STM3160212A, ATA DISK drive [ 4.287337] usbcore: registered new interface driver hiddev [ 4.298372] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 4.302400] hda: UDMA/100 mode selected [ 4.303827] input: Logitech USB-PS/2 Optical Mouse as /class/input/input1 [ 4.306490] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 4.306631] hdb: UDMA/100 mode selected [ 4.306854] Probing IDE interface ide1... [ 4.339370] input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-2 [ 4.339516] usbcore: registered new interface driver usbhid [ 4.340105] usbhid: v2.6:USB HID core driver [ 5.066510] hdc: CD-532E-A, ATAPI CD/DVD-ROM drive [ 5.402353] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 5.402504] hdc: Disabling (U)DMA for CD-532E-A (blacklisted) [ 5.402544] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 5.402704] ide0 at 0xcc00-0xcc07,0xc802 on irq 16 [ 5.402781] ide1 at 0xc400-0xc407,0xc002 on irq 16 [ 5.406312] NFORCE-MCP61: 0000:00:06.0 (rev a2) UDMA133 controller [ 5.406312] NFORCE-MCP61: IDE controller (0x10de:0x03ec rev 0xa2) at PCI slot 0000:00:06.0 [ 5.406312] NFORCE-MCP61: not 100% native mode: will probe irqs later [ 5.406312] NFORCE-MCP61: IDE port disabled [ 5.406312] ide2: BM-DMA at 0xf000-0xf007 [ 5.406312] Probing IDE interface ide2... [ 5.475337] hda: max request size: 128KiB [ 5.487337] hda: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=65535/16/63 [ 5.487337] hda: cache flushes not supported [ 5.487337] hda: hda1 hda2 < hda5 > [ 5.551337] hdb: max request size: 512KiB [ 5.711456] hdb: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63 [ 5.795809] hdb: cache flushes supported [ 5.795869] hdb: hdb1 [ 5.886312] hdc: ATAPI 32X CD-ROM drive, 128kB Cache [ 5.886312] Uniform CD-ROM driver Revision: 3.20 [ 5.994387] ide2 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 5.998312] sata_nv 0000:00:08.0: version 3.5 [ 5.998312] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21 [ 5.998324] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 21 [ 5.998457] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 5.999255] scsi0 : sata_nv [ 6.002312] scsi1 : sata_nv [ 6.002396] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 21 [ 6.002436] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 21 [ 6.327255] ata1: SATA link down (SStatus 0 SControl 300) [ 6.651255] ata2: SATA link down (SStatus 0 SControl 300) [ 6.650643] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded [ 6.651255] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 6.651255] ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18 [ 6.655061] eth0: RTL8169sc/8110sc at 0xf8850000, 00:50:8d:ca:57:93, XID 18000000 IRQ 18 [ 7.503994] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 7.506874] ide_generic: I/O resource 0x1F0-0x1F7 not free. [ 7.506874] ide_generic: I/O resource 0x170-0x177 not free. [ 7.590874] device-mapper: uevent: version 1.0.3 [ 7.590891] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com [ 8.231904] PM: Starting manual resume from disk [ 8.498874] kjournald starting. Commit interval 5 seconds [ 8.500485] EXT3-fs: mounted filesystem with ordered data mode. [ 18.002874] input: Power Button (FF) as /class/input/input2 [ 18.058916] ACPI: Power Button (FF) [PWRF] [ 18.059028] input: Power Button (CM) as /class/input/input3 [ 18.122914] ACPI: Power Button (CM) [PWRB] [ 19.066874] input: PC Speaker as /class/input/input4 [ 19.128534] Floppy drive(s): fd0 is 1.44M [ 19.159477] FDC 0 is a post-1991 82077 [ 19.166905] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00 [ 19.166961] i2c-adapter i2c-1: nForce2 SMBus adapter at 0xf400 [ 19.306874] parport_pc 00:09: reported by Plug and Play ACPI [ 19.306874] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] [ 19.498874] Error: Driver 'pcspkr' is already registered, aborting... [ 19.932634] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20 [ 19.935400] ACPI: PCI Interrupt 0000:00:05.0[B] -> Link [AAZA] -> GSI 20 (level, low) -> IRQ 20 [ 19.935400] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 19.979400] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... [ 23.383826] Adding 765944k swap on /dev/Ubuntu/swap_1. Priority:-1 extents:1 across:765944k [ 24.207423] EXT3 FS on dm-0, internal journal [ 25.744433] loop: module loaded [ 28.712839] kjournald starting. Commit interval 5 seconds [ 28.712956] EXT3 FS on hda1, internal journal [ 28.713014] EXT3-fs: mounted filesystem with ordered data mode. [ 33.950297] r8169: eth0: link up [ 40.845008] NET: Registered protocol family 10 [ 40.846650] lo: Disabled Privacy Extensions [ 51.066301] eth0: no IPv6 routers present [ 51.975432] lp0: using parport0 (interrupt-driven). [ 52.036196] ppdev: user-space parallel port driver [ 67.751432] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) [ 84.415437] eth0: no IPv6 routers present